IMPORTANT NOTICE
A CONFORMITY INSPECTION OF THE WINGS IS MANDATORY PRIOR
TO PURCHASE & INSTALLATION OF THE Wing-X STOL & SPAR MODIFICATION.
Wing extensions add to the structural load and increase bending moments of the wing structure. Original factory wings have been tested and these additional loads are addressed with the introduction of our spar reinforcement design. Prior to installing our wing extensions and spar reinforcement It is MANDATORY to inspect both wing(s) in order to insure the structure conforms to original Cessna design. Any splice repairs approved or otherwise to the forward or aft spar may negate the possibility of installing our spar reinforcement. In order to identify the position of our spar reinforment you may download our installation drawings and install guide from our website at; https://www.wingxstol.com/html/faq_fr.html
If you have any questions or concerns regarding structural repairs on your Cessna wing
Please contact us prior to ordering your wing extension kit. |